Photovoltaic Solar Panels Nano coating Easy to Clean, Non-stick, Oil Repellent and Transmissive
HCP0030
Hydrophobicity, Anti-static, Self-cleaning, Improve light transmittance>93.5%
Quantity:
HCP0030 It is a single-component ultra-hydrophilic and waterproof inorganic nano-coating developed by Guangzhou Hongtai, which is mainly developed for the spraying of photovoltaic glass at the factory end.
The nano-silica fractal combination technology can form a fine concave and convex below 50nm on the surface of the object, and the cured ultra-thin coating has a hydrophilic Angle of less than 10°.
Pure inorganic composition, coating has strong weather resistance and wear resistance, coating at the same time can inhibit the substrate surface electrostatic, the dust is not easy to attach substrate, even if the attached dust in water can self clean, always keep the photovoltaic glass surface light transmittance and cleanliness, reduce photovoltaic module efficiency attenuation, improve the conventional component output gain average of 2.8 to 3.2%.
Compared with the traditional anti-permeability coating, HCP0030 can be sprayed by 700℃ toughened treatment for 3-5 minutes, greatly improve the hardness of the coating to 5H, while maintaining good permeability and superhydrophilicity.
Applicable material
Photovoltaic glass
Photovoltaic glass
Applied range
Photovoltaic glass self-cleaning reduction and dust prevention treatment
Photovoltaic glass self-cleaning reduction and dust prevention treatment
Product Features
Medium temperature rapid curing, with 5H pencil hardness
Compared with the traditional ultra-hydrophilic coating of 1000 times, it has a wear resistance life of more than 15000 times, pure inorganic components, excellent weather resistance, and outdoor effective protection for 5 years
Strong antistatic properties, the surface resistance value between 107-109 Ω, greatly reduce the dust attachment
For water contact Angle less than 10°, in rain or condensation self-cleaning surface dust or stains, reduce the cleaning frequency
100℃ * 5-10min, can be completely cured, by toughened 700℃ * 3-5 minutes, can improve the hardness and adhesion of the coating
Special nano-convex structure improves the light transmittance of photovoltaic glass by 2.8-3.2%
Medium temperature rapid curing, with 5H pencil hardness
Compared with the traditional ultra-hydrophilic coating of 1000 times, it has a wear resistance life of more than 15000 times, pure inorganic components, excellent weather resistance, and outdoor effective protection for 5 years
Strong antistatic properties, the surface resistance value between 107-109 Ω, greatly reduce the dust attachment
For water contact Angle less than 10°, in rain or condensation self-cleaning surface dust or stains, reduce the cleaning frequency
100℃ * 5-10min, can be completely cured, by toughened 700℃ * 3-5 minutes, can improve the hardness and adhesion of the coating
Special nano-convex structure improves the light transmittance of photovoltaic glass by 2.8-3.2%
Performance
Hardness: 6H (heated curing)
Self-cleaning characteristics: dust is not stained, easy to rinse
Effective transmission ratio of sunlight:>93.5%
LOT%: 2.8-3.2
Adhesion, level: 0
Flexibility, mm 1
Dry friction:> 15000 times, does not affect the permeability
Wet friction resistance:> 10000 times, does not affect the permeability
Dry film thickness, nanometer: recommended as: 100-120
Hardness: 6H (heated curing)
Self-cleaning characteristics: dust is not stained, easy to rinse
Effective transmission ratio of sunlight:>93.5%
LOT%: 2.8-3.2
Adhesion, level: 0
Flexibility, mm 1
Dry friction:> 15000 times, does not affect the permeability
Wet friction resistance:> 10000 times, does not affect the permeability
Dry film thickness, nanometer: recommended as: 100-120
Recommend Products
